Good dimensional stability
Showing all 9 results
-
LATAMID SP1 AM S/10
PA6.10 (Polyamide 6.10) glass sphere filled | Compound for FFF and FGF 3D printing | Engineering | Low moisture absorption | Dimensionally stable | Wear-resistant | Colourable
$1.00This product has multiple variants. The options may be chosen on the product page -
LATAMID SP4 AM MK/15
PA6.66 (modified copolymer polyamide) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Engineering | Dimensionally stable | Aesthetic | Sandable
$1.00This product has multiple variants. The options may be chosen on the product page -
LATER G AM K/10
PETg (polyethylene terephthalate-glycol) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic
$1.00This product has multiple variants. The options may be chosen on the product page -
LATER G AM UVH TES/10
PETg (polyethylene terephthalate-glycol) with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved dimensional stability
$1.00This product has multiple variants. The options may be chosen on the product page -
LATER G AM UVH-V0HF
PETg (Polyethylene Terephthalate Glycol) with halogen-free self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing V0 | UV-stabilised | Colourable
$1.00This product has multiple variants. The options may be chosen on the product page -
LATIBLEND 7587 AM K/10
Carbon fibre reinforced PC/PBT (Polycarbonate/Polybutylene terephthalate) blend | Compound for FFF and FGF 3D printing | Structural | Antistatic
$1.00This product has multiple variants. The options may be chosen on the product page -
LATIECO 7587 MR AM UV K/30 E
Partially recycled, carbon-fibre reinforced PC/PBT (polycarbonate/polybutylene terephthalate) blend | FGF 3D printing compound | Structural | Antistatic | UV-stabilised
$1.00This product has multiple variants. The options may be chosen on the product page -
LATIECO 7787 MR AM UV A
PETg/rPC (polyethylene terephthalate-glycol/polycarbonate) blend 100% recycled | Compound for FFF and FGF 3D printing | UV-stabilised | Colourable
$1.00This product has multiple variants. The options may be chosen on the product page -
LATIOHM 77-09 AM PD02 M/10
PETg (polyethylene terephthalate-glycol) modified with permanent antistatic additives and reinforced short glass fibre | Compound for FFF 3D printing | Antistatic | Colourable
$1.00This product has multiple variants. The options may be chosen on the product page