Description
LATILUB 82 AM YK/150 is a technical compound based on PA12 (Polyamide 12) reinforced with 15% carbon fibres and aramide fiber (Kevlar). Featuring good mechanical properties, it provides improved tribological properties, antistaticity (ATEX environments), chemical resistance and low hygroscopicity. It is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).
Base polymer PA12
Fillers/Reinforcements Carbon fibers and Aramid fibers (Kevlar)
Mechanical properties Improved mechanical properties
Chemical-physical properties Low moisture absorption, high chemical resistance
Functional properties Antistaticity (ATEX)/ Electrical conductivity
Thermal properties Good thermal resistance
3D Printing Suitable also for printing from granule
Granule drying conditions 80°C
Filament extrusion conditionsExtrusion temperature: 210°C – 230°C
Filament drying temperature: 90°C
Filament drying temperature: 90°C
3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended nozzle: steel nozzle
Cooling: OFF
Other: Ideal CLOSED and thermostat-controlled ROOM
Bed temperature: 85°C
Recommended nozzle: steel nozzle
Cooling: OFF
Other: Ideal CLOSED and thermostat-controlled ROOM
Available Colors
