Skip to content Skip to footer

PA12 (Polyamide 12) tungsten powder filled | Compound for FFF and FGF 3D printing | X Rays shielding | Antistatic | Low moisture absorption | Chemically resistant

LATIGRAY 82-03 AM CW/95

$1.00

LATIGRAY 82-03 AM CW/95 is a technical compound based on PA12 (Polyamide 12) loaded with 95 percent tungsten powder. It features excellent chemical resistance, low hygroscopicity, allows excellent X-ray shielding (lead replacement), antistaticity and is optimized for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA12

Chemical-physical properties Low moisture absorption

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from pellets

Suitability Suitable for medical applications

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 210°C – 230°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 82199FA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Radiopaque Product ID: 26788

Description

LATIGRAY 82-03 AM CW/95 is a technical compound based on PA12 (Polyamide 12) loaded with 95 percent tungsten powder. It features excellent chemical resistance, low hygroscopicity, allows excellent X-ray shielding (lead replacement), antistaticity and is optimized for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA12

Chemical-physical properties Low moisture absorption

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from pellets

Suitability Suitable for medical applications

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 210°C – 230°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Tungsten powder
Polimero base	PA12
Filler/rinforzi	Tungsten powder
Proprietà termiche	Good thermal resistance
Proprietà fisiche	High chemical resistance, Low moisture absorption
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Suitable also for printing from granule
Categoria	Electrically conductive/antistatic, Radiopaque