Skip to content Skip to footer

LATIBLEND 7587 AM K/10

$1.00

LATIBLEND 7587 AM K/10 is a technical compound based on a PC/PBT (Polycarbonate/Polybutylene terephthalate) blend reinforced with 10% carbon fibre. With good mechanical properties and antistatic properties (ATEX environments), it guarantees dimensional stability and thermal resistance. Optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PC/PBT

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule, Good dimensional stability

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 100°C

Filament extrusion conditionsExtrusion temperature: 250°C – 260°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 55499AA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Structural Product ID: 25888

Description

LATIBLEND 7587 AM K/10 is a technical compound based on a PC/PBT (Polycarbonate/Polybutylene terephthalate) blend reinforced with 10% carbon fibre. With good mechanical properties and antistatic properties (ATEX environments), it guarantees dimensional stability and thermal resistance. Optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PC/PBT

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule, Good dimensional stability

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 100°C

Filament extrusion conditionsExtrusion temperature: 250°C – 260°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PC/PBT
Filler/rinforzi	Carbon fibers
Proprietà termiche	Good thermal resistance
Proprietà meccaniche	Improved mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Good dimensional stability, Suitable also for printing from granule
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet