Skip to content Skip to footer

LATER G HT AM K/10

$1.00

LATER G HT AM K/10 is a technical compound based on PETg (polyethylene terephthalate-glycol) reinforced with 10% carbon fibres and modified for improved heat resistance. Featuring good mechanical properties and antistaticity (ATEX environments), it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PETg HT

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Thermal properties Improved thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 60°C

Filament extrusion conditionsExtrusion temperature: 250°C – 260°C
Filament drying temperature: 60°C

3D printing conditionsExtruder temperature: 240°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 77299CA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Structural Product ID: 25879

Description

LATER G HT AM K/10 is a technical compound based on PETg (polyethylene terephthalate-glycol) reinforced with 10% carbon fibres and modified for improved heat resistance. Featuring good mechanical properties and antistaticity (ATEX environments), it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PETg HT

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Thermal properties Improved thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 60°C

Filament extrusion conditionsExtrusion temperature: 250°C – 260°C
Filament drying temperature: 60°C

3D printing conditionsExtruder temperature: 240°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PETg HT
Filler/rinforzi	Carbon fibers
Proprietà termiche	Improved thermal resistance
Proprietà meccaniche	Improved mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Suitable also for printing from granule
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet