Skip to content Skip to footer

LATAMID SP1 AM K/15

$1.00

LATAMID SP1 AM K/15 is a technical compound based on PA6.10 (Polyamide 6.10) reinforced with 15% carbon fibres. Featuring excellent mechanical properties, antistaticity and low hygroscopicity, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA6.10

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 230°C – 250°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 82199CA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Structural Product ID: 25846

Description

LATAMID SP1 AM K/15 is a technical compound based on PA6.10 (Polyamide 6.10) reinforced with 15% carbon fibres. Featuring excellent mechanical properties, antistaticity and low hygroscopicity, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA6.10

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 230°C – 250°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PA6.10
Filler/rinforzi	Carbon fibers
Proprietà termiche	Good thermal resistance
Proprietà fisiche	Low moisture absorption
Proprietà meccaniche	Improved mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Suitable also for printing from granule
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet