Skip to content Skip to footer

LATAMID-12-AM-H2-K-30

LATAMID 12 AM H2 K/30

$1.00

LATAMID 12 AM H2 K/30 is a technical compound based on PA12 (Polyamide 12) reinforced with 30% carbon fibres. Featuring excellent mechanical properties, antistaticity (ATEX environments), chemical resistance and low hygroscopicity, it is optimised for direct 3D printing from granule (FGF).

Base polymer PA12

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption, High chemical resistance

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditions For information contact us

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 82199DA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Plastic granules for 3D printing FGF/LFAM, Structural Product ID: 26519

Description

LATAMID 12 AM H2 K/30 is a technical compound based on PA12 (Polyamide 12) reinforced with 30% carbon fibres. Featuring excellent mechanical properties, antistaticity (ATEX environments), chemical resistance and low hygroscopicity, it is optimised for direct 3D printing from granule (FGF).

Base polymer PA12

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption, High chemical resistance

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditions For information contact us

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PA12
Filler/rinforzi	Carbon fibers
Proprietà fisiche	High chemical resistance, Low moisture absorption
Proprietà meccaniche	High mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Only for direct printing from granule
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet