Skip to content Skip to footer

LARTON AM K/10

$1.00

LARTON AM K/10 is a technical PPS (polyphenylene sulphide) based compound reinforced with 10% carbon fibre. Featuring good mechanical properties, antistaticity (ATEX environments), high temperature resistance and self-extinguishing, good chemical and hydrolysis resistance, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PPS

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties
Chemical-physical properties Low moisture absorption, High chemical resistance
Thermal properties High thermal resistance
3D Printing Suitable also for printing from granule
Functional properties Self-extinguishing, Antistaticity (ATEX)/ Electrical conductivity
Granule drying conditions 100°C
Filament extrusion conditionsExtrusion temperature: 290°C – 310°C
Filament drying temperature: 90°C
3D printing conditionsExtruder temperature: 310°C – 330°C
Bed temperature: 90°C – 110°C
Recommended Nozzle: steel nozzle
Cooling: OFF
Post-annealing conditions: 130°C 1h x 1mm
Other: Ideal CLOSED and thermostat-controlled ROOM
Richiedi info

Description

LARTON AM K/10 is a technical PPS (polyphenylene sulphide) based compound reinforced with 10% carbon fibre. Featuring good mechanical properties, antistaticity (ATEX environments), high temperature resistance and self-extinguishing, good chemical and hydrolysis resistance, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PPS

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties
Chemical-physical properties Low moisture absorption, High chemical resistance
Thermal properties High thermal resistance
3D Printing Suitable also for printing from granule
Functional properties Self-extinguishing, Antistaticity (ATEX)/ Electrical conductivity
Granule drying conditions 100°C
Filament extrusion conditionsExtrusion temperature: 290°C – 310°C
Filament drying temperature: 90°C
3D printing conditionsExtruder temperature: 310°C – 330°C
Bed temperature: 90°C – 110°C
Recommended Nozzle: steel nozzle
Cooling: OFF
Post-annealing conditions: 130°C 1h x 1mm
Other: Ideal CLOSED and thermostat-controlled ROOM
Richiedi info

Additional information

Disponibile in

Polimero base

Filler/rinforzi

Proprietà termiche

Proprietà fisiche

,

Proprietà meccaniche

Proprietà funzionali

,

Stampa 3D

Categoria

, , ,

RequestDataSheet

Download

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds