Skip to content Skip to footer

LATAMID 12 AM H2 MK/15

$1.00

LATAMID 12 AM H2 MK/15 is a technical compound based on PA12 (Polyamide 12) reinforced with 15% short carbon fibres. Featuring excellent mechanical properties, aesthetic, antistaticity (ATEX environments), chemical resistance and low hygroscopicity, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA12

Fillers/Reinforcements Short carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption, high chemical resistance

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule, improved aesthetics

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 210°C – 230°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 82199GA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Structural Product ID: 26849

Description

LATAMID 12 AM H2 MK/15 is a technical compound based on PA12 (Polyamide 12) reinforced with 15% short carbon fibres. Featuring excellent mechanical properties, aesthetic, antistaticity (ATEX environments), chemical resistance and low hygroscopicity, it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PA12

Fillers/Reinforcements Short carbon fibers

Mechanical properties Improved mechanical properties

Chemical-physical properties Low moisture absorption, high chemical resistance

Thermal properties Good thermal resistance

3D Printing Suitable also for printing from granule, improved aesthetics

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 80°C

Filament extrusion conditionsExtrusion temperature: 210°C – 230°C
Filament drying temperature: 90°C

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 85°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PA12
Filler/rinforzi	Short Carbon fibers
Proprietà fisiche	High chemical resistance, Low moisture absorption
Proprietà meccaniche	Improved mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Suitable also for printing from granule, Very good aesthetics/compatibility
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet