Skip to content Skip to footer

LATIECO 7587 MR AM UV K/30 E

$1.00

LATIECO 7587 MR AM UV K/30 E is a technical compound based on partially recycled blended PC/PBT (Polycarbonate/Polybutylene Terephthalate) reinforced with 30% carbon fiber. UV-stabilised, it has excellent mechanical properties, antistaticity (ATEX environments), excellent dimensional stability and thermal resistance. Optimised for direct-to-granule (FGF) 3D printing.

Base polymer rPC/PBT CF

Fillers/Reinforcements Carbon fibers

Mechanical properties High mechanical properties

Chemical-physical properties UV-stabilised

Thermal properties Good thermal resistance

“Green” version On polymer partly recycled

3D Printing Only for direct printing from granule, Good dimensional stability

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 70°C

Filament extrusion conditions For information contact us

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

SKU: 55499CA Categories: Electrically conductive/antistatic, Green/sustainable, Plastic granules for 3D printing, Plastic granules for 3D printing FGF/LFAM, Structural Product ID: 25896

Description

LATIECO 7587 MR AM UV K/30 E is a technical compound based on partially recycled blended PC/PBT (Polycarbonate/Polybutylene Terephthalate) reinforced with 30% carbon fiber. UV-stabilised, it has excellent mechanical properties, antistaticity (ATEX environments), excellent dimensional stability and thermal resistance. Optimised for direct-to-granule (FGF) 3D printing.

Base polymer rPC/PBT CF

Fillers/Reinforcements Carbon fibers

Mechanical properties High mechanical properties

Chemical-physical properties UV-stabilised

Thermal properties Good thermal resistance

“Green” version On polymer partly recycled

3D Printing Only for direct printing from granule, Good dimensional stability

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 70°C

Filament extrusion conditions For information contact us

3D printing conditionsExtruder temperature: 250°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Additional information

Disponibile in	Black
Polimero base	PBT/rPC
Filler/rinforzi	Carbon fibers
Versione “green”	On partially recycled polymer
Proprietà termiche	Good thermal resistance
Proprietà fisiche	UV-stabilised
Proprietà meccaniche	High mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Good dimensional stability, Only for direct printing from granule
Categoria	Electrically conductive/antistatic, Green/Sustainable, Structural

RequestDataSheet